How to replace a solar light....
1. Bend upward one of the rings surrounding the top of the solar light (there is one on each side of the spinner), need only bend one up.
2. To take out the solar light to turn on and charge battery - carefully remove bottom of light from raised peg in sits on, this will require some "wiggling" of light so as not to break the bottom of light. When removed, twist off top of solar light and turn switch to "on" and reassemble top of light.
3. "Wiggle" it back onto the peg it sits on and bend ring from Step 1 downward over the solar light.
4. Secure the rings on both sides to ensure the solar light is placed on the spinner snugly and sit back and enjoy your beautiful solar light wind spinner!
To view a picture of these instructions, visit our How To page
Thank you
Dakota Steel Art
Designers of Stainless Steel Wind Spinners
No comments:
Post a Comment
Thank you for your comment. Please be advised, if you wish an answer to your comment or question to contact us directly at the email address in our profile. Thank you.